Component ROLLINGCONTAINERAREA

Attribute summary

Typically used attributes

All attributes are

General attributes are

Positioning

Used inside: ADAPTIVETILECONTAINER, ADAPTIVETOOLBAR, AREASELECTOR, BLOCKABLEAREA, BUTTONPOPUP, COLSYNCHEDROW, DRAWAREA, FOLDABLEPANEHEADERROW, GRIDHEADERLABEL, GRIDLAYOUTROW, HIDEABLE, LABELCONTAINER, OVERLAYAREABASEITEM, OVERLAYAREAITEM, PAGEBEANROOT, PAINTAREAITEM, REPEAT, ROW, ROWADAPTIVELINE, ROWFLEXCOLUMNCONTAINER, ROWFLEXLINECONTAINER, ROWFOOTER, ROWHEADER, ROWMATRIXAREA, ROWTITLEBAR, SCALEPANE, SCHEDULEITEM, SHIFTCONTAINER, STABLEAREA, STABLEAREACONFIGAREA, TEXTWITHCONTROLS, TREENODE

Using inside: DYNAMICCONTENT, REPEAT, ROLLINGCONTAINER

Attribute details

actionListener

Binding to server side method that processes the events coming from this component.

#{methodBinding}Method binding

adapterbinding

Special binding to component adapter object instance on server side. The component adapter must be an instance of IComponentAdapterBinding. For some components (e.g. FIXGRID) there is an extended interface (e.g. IFIXGRIDComponentAdapterBinding).

#{tobedefined}Binding to IComponentAdapter instance

animatechangeofsize

If set to true then changes of the width/height of the component are animated.

trueWith animation
falseWithout animation (default)

attributemacro

Name of macro that is used for generating certain attributes of this component. Please pay attention: the value of this attribute is read one time for each control and cannot be changed afterwards.

background

Background color of the component. Any RGB value can be chosen using format #rrggbb.

#FFFFFFWhite
#000000Black
#FF0000Red
#00FF00Green
#0000FFBlue
#0000FF30Blue with a transparency of x30.

bgpaint

Background paint commands. There is a sequence of paint commands which can be executed one after the other by listing them as semicolon separated list. - By appending certain suffixes to a command you can define that the command is only executed in a certain situation. Available suffixes are: _empty (content of component is empty), _focus, _nofocus, _enabled, _disabled, _mouseover. Multiple suffixes can be used in parallel (e.g. write_empty_focus).

---------- bgpaint commands for all clients -----
error()Component indicates error.
mandatory()Component indicates mandatory input. Only is shown if component does not have any content yet.
bgbackground(#FF0000)Background with one color
bgbackground(#FF0000,#0000FF,vertical)Background as gradient of two colors
bgimage(left,/images/xyz.png)Image at certain position
bgwrite(left,...text...)Text at certain position
bgwrite(left,...text...,#800000,12)Text at certain position with defined color and size
---------- bgpaint commands for Java clients -----
rectangle(0,0,100%,100%,#FF0000)Red rectangle
rectangle(20,20,100,100,#FF0000)Red rectangle from 20,20 to 120,120
rectangle(20,20,100%-40,100%-40,#FF0000)Minus absolute values is allowed after percentage definitions
rectangle(0,0,100%,100%,#FF0000,#00FF00,vertical)Rectangle with color changing from red to green in vertical direction
roundedrectangle(0,0,100%,100%,10,10,#FF0000,#00FF00,vertical)Rectangle with color changing from red to green in vertical direction
line(0,0,100%,100%,1,#00FF00)Green line crossing the whole rectangle, from coordinate 0,0 to coordinat 100%,100%, thickness of line is 1
image(0,0,/images/xyz.png,lefttop)Image output x,y,image,position (lefttop/centermiddle/rightbottom...)
image(0,0,200,100,/images/xyz.png,lefttop)Image output x,y,width,heigh,image,position (lefttop/centermiddle/rightbottom...)
scaledimage(0,0,200,100,/images/xyz.png,lefttop)Scaled image output, the width/height ration is kept while scaling : x,y,width,heigh,image,position (lefttop/centermiddle/rightbottom...)
heximage(0,0,08FF40324672849CDFE...,lefttop)Image output x,y,hexadecimal image,position (lefttop/centermiddle/rightbottom...)
heximage(0,0,200,100,08FF40324672849CDFE...,lefttop)Image output x,y,width,height,hexadecimal image,position (lefttop/centermiddle/rightbottom...)
scaledheximage(0,0,200,100,08FF40324672849CDFE...,lefttop)Scaled image output x,y,width,height,hexadecimal image,position (lefttop/centermiddle/rightbottom...)
border(0,0,100%,100%,#C0C0C0,2)Rectangular border with thickness 2
roundedborder(0,0,100%,100%,10,10,#C0C0C0,2)Rounded border with thickness 2
write(0,0,Some text,lefttop)Some text in the left top corner
write(50%,50%,Some text,20,#00FF00,centermiddle)Some text in the left center, font size 20, font color green
write(50%,50%,Some text,20,#00FF00,bold,centermiddle)Some text in the left center, font size 20, font color green,bold
write(50%,50%,Some text,20,#00FF00,italic,centermiddle)Some text in the left center, font size 20, font color green,italic
write(50%,50%,Some text,20,#00FF00,normal,centermiddle)Some text in the left center, font size 20, font color green,normal
write(0,100%,Some text,20,#00FF00,default,lefttop,90)Some text in the left bottom corner, font size 20, font color green, 90 degrees rotated
write(20,100%,Some text,20,#00FF00,default,lefttop,90,-1,1)Some text in the left bottom corner, font size 20, font color green, 90 degrees rotated. x scaling -1, y scaling 1
write(20,100%,Some text,20,#00FF00,bold,lefttop,90,-1,1)Some text in the left bottom corner, font size 20, font color green, 90 degrees rotated. x scaling -1, y scaling 1
writeifempty(0,0,Some text,lefttop)Same as write-command, but now only visible if component contains data
writeifempty(50%,50%,Some text,20,#00FF00,centermiddle)Same as write-command, but now only visible if component contains data
writemultiline(0,0,100%,100%,Some text)Some text into the defined rectangle. Only fully supported with FX client, in Swing client the text will be output as one line.
writemultiline(0,0,100%,100%,Some text,20,#FF0000,bold)Some text into the defined rectangle. In additional font size, text color and text style (normal,bold,italic) are passed. Only fully supported with FX client, in Swing client the text will be output as one line.
oval(0,0,100%,100%,#FF0000)Red ellipse
oval(0,0,100%,100%,#FF0000,#00FF00,vertical)Red ellipse with color changing from red to green
ovalborder(0,0,100%,100%,#FF0000,2)Red ellipse border, red, 2 pixels thick
grid(100,#00000020)Grid with line distance 100, black line color - with transparency
nodisabled()Switches off the automated shading of disabled input components
background(#FF0000)Sets the background of the painted area.
backgroundnofocus(#FF0000)Sets the background of the painted area - which is only drawn if the component does not hold the focus.
repeatimage(/images/xyz.png)The image is repeated and drawn all over the available space.

cascaderenderedfalse

If set to true then the component will switch its own RENDERED status to false if all child components are not rendered.

falseNo cascading of rendered false (default)
trueWith cascading of rendered false

clientname

Name that is assigned to the component at client side: there is no specific function associated with the name - but it can be used on client side to describe the component in a clearer way. The name is e.g. used by UI test tools that replay certain user interaction sequences - and that reference components via their name.

colalignmentx

In case the space provided by the container (e.g. gridlayoutcontainer) for the component is wider than the component itself: definition where to place the component

leftLeft (default)
centerCenter
rightRight

colspan

Spanning of columns if used inside a COLSYNCHEDROW or inside a GRIDLAYOUTPANE.

1Control spans one column (default)
22 columns
33 columns

comment

Comment that can be asigned to any component. The comment is not operationally used.

Any textAny text

configinfo

Configuration information that is attached to this component. This information is not functionally used by CaptainCasa, but may be used for any application specific purpose.

cutheight

In case the content of the component exceeds the available height and in case the height is defined as percentage value then the content by default will expand the height correspondingly. But, if defined as true, then the content will be cut.

trueCut content to fit into available width
falseExpand surrounding layout (default)

cutwidth

In case the content of the component exceeds the available width and in case the width is defined as percentage value then the content by default will expand the width correspondingly. But, if defined as true, then the content will be cut.

trueCut content to fit into available width
falseExpand surrounding layout (default)

dragroundtrip

If set to true then an event is triggered on server side when the user starts a drag operation. The event is of type BaseActionEventDragStarted.

falseNo event triggered (default)
trueEvent triggered

dragsend

Description of object that can be dragged from this component. The description consists out of a type and and id. A component may have multiple objects that can be associated.

article:4711Example: article
file:harry.txt;content:Hello world!Example: Multiple object descriptions

droprastertext

Text that is shown when dragging over the component. The text is only shown if a drop is possible (DROPRECEIVE definition).

 (default) No text shown
 pixel(5) Current drop pixel position - in steps of 5 (or any other value)
 pixelX(5) Current drop pixel position - only the x-position
 pixelY(5) Current drop pixel position - only the y-position
 percentage(5) Current drop pixel position as percentage number - in steps of 5 (or any other value)
 percentageX(5) Current drop pixel position as percentage number - only the x-position
 percentageY(5) Current drop pixel position as percentage number - only the y-position
 textX(0,left,25,middle,75,right) Text that is shown depending from percentage x-position

dropreceive

Semicolon separated list of object types that can be dropped onto this component.

articleExample: articles can be dropped
article;customerExample: articles and customers can be dropped

dropshape

flusharea

If set to true then data changes within this area will cause a flush-rountrip to the server as soon as the user leaves the area.

trueFlush is done on data change + leaving the area.
falseNo flush. Data is transferred to server with next round trip. (Default)

flushreference

This is a bit tricky: for a whole are (e.g. a pane of fields) you can define that the first time, that data is changed by the user, a flush is sent to the server. Example: you want a certain icon to appear when the user changes data. - If not using this flag then you need to put a flush behin each component of the area in order to find out that the user changed one item.

#{property}Property refernce to a property. Whenever the value changed, then the flush behaviour is active.

focusable

Defines if the component is focusable. The default depends on the component: typical input components (field, check box, ...) are focusable by default, while typical structure components (pane, label, ...) are not focusable by default.

trueFocusable
falseNot focusable

focusnexthotkey

Hotkey definition that is used als alternative to the tab-key for moving the focus into the next component.

 No keyboard association (default)
ctrl-83Control key + s
alt-83Alt key + s
shift-83Shift key + s
ctrl-shift-83Control key + Shift key + s
10return
32space
37cursor left
38cursor up
39cursor right
40cursor down
33page up
34page down
36Begin
35End
27escape
127Del
65a
66b
67c
68d
69e
70f
71g
72h
73i
74j
75k
76l
77m
78n
79o
80p
81q
82r
83s
84t
85u
86v
87w
88x
89y
90z
480
491
502
513
524
535
546
557
568
579
112F1
113F2
114F3
115F4
116F5
117F6
118F7
119F8
120F9
121F10
122F11
123F12

focusprevioushotkey

Hotkey definition that is used als alternative to the tab-key for moving the focus into the previous component.

 No keyboard association (default)
ctrl-83Control key + s
alt-83Alt key + s
shift-83Shift key + s
ctrl-shift-83Control key + Shift key + s
10return
32space
37cursor left
38cursor up
39cursor right
40cursor down
33page up
34page down
36Begin
35End
27escape
127Del
65a
66b
67c
68d
69e
70f
71g
72h
73i
74j
75k
76l
77m
78n
79o
80p
81q
82r
83s
84t
85u
86v
87w
88x
89y
90z
480
491
502
513
524
535
546
557
568
579
112F1
113F2
114F3
115F4
116F5
117F6
118F7
119F8
120F9
121F10
122F11
123F12

focussensitive

focussequence

Explicit definition of tab sequence. The format of the definition is GROUP/SEQUENCENUMBER. You can define any number of tab-groups within one page. If the user tabs into a component with a FOCUSSEQUENCE definition then the next tab will focus the next component belonging to the same GROUP and holding the next SEQUENCENUMBER. - By default the FOCUSSEQUENCE value is prefixed with some page-id before being sent to the client so that definitions of one page do not affect definitions of another page. You can explicitly avoid this prefixing by using the naming convention ccfix_GROUP/SEQUENCENUMBER.

---------- Examples -----
A/1Example: group A, sequence 1
A/2Example: group A, sequence 2

height

Height of the control. Either defined as absolute value or as percentage value. Pay attention when using percentage sizing: the size refers to what is given from the components above. When using percentage sizing then you may define a minimum size in addition, by appending it with a semicolon: "100%;100" means: use 100%, but always keep a minimum size of 100. If using absolute sizes you may append a "+" to define, that the size is extended if required by the component. - Please note: the sizing may be completely taken over by the parent component (e.g. if a component is used in a grid cell), in this case the size definintions on this component level are obsolete.

100100 Pixels
120120 Pixels
200200 Pixels
50%50 percents
100%Full available height

helpid

Help id that is part of the online help management.

helpidId pointing to a server side online help file.
ccnof1helpExplicitly switching off default F1 help. This is sometimes required in case you want to explicitly react on F1-key as hotkey.

keysensitive

If set to true then the component registers key strokes within its content - after a certain short duration a corresponding KeySequence event is sent to the server side, telling about the sequence of characters that was input.

false(default) No key sensitivity
trueKey sensitive - listening to key events.

popupmenu

Reference to the id of a POPUPMENU definition that is available either in this page or in a page that includes this page.

popupmenuloadroundtrip

If set to true, then an explicit roundtrip is triggered when the user presses the right mouse button in order to open a popup menu. As result you can define the popup menu dynamically (using DYNAMICCONTENT) and prepare the popup menu at this point of time when the user want to open it.

falseMenu is already defined in layout, no roundtrip (default)
trueMenu is dynamically created, roundtrip is triggered

reference

Reference to an outside object that is the content behind the component. E.g. a field is representing a certain field of a database table: in this case you could define the value table;column. The reference plays a siginficant role within the attributemacro management.

refOne reference
ref1;ref2Two references
ref1;ref2;ref3Three references

rendered

Flag that indicated if this component is rendered at all. If set to false then the component is not rendered - there is no component data sent to the client.

trueComponent is rendered (default)
falseComponent is not rendered

requestfocus

Indicator, by which you can control the focus to be moved into this component.

creationComponent requests focus when created.
...int value...Counter coming from server side. Please check Developers Guide.

requestfocushotkey

Hotkey definition that is used request the focus for this component. The hotkey is globally available within the corresponding dialog.

 No keyboard association (default)
ctrl-83Control key + s
alt-83Alt key + s
shift-83Shift key + s
ctrl-shift-83Control key + Shift key + s
10return
32space
37cursor left
38cursor up
39cursor right
40cursor down
33page up
34page down
36Begin
35End
27escape
127Del
65a
66b
67c
68d
69e
70f
71g
72h
73i
74j
75k
76l
77m
78n
79o
80p
81q
82r
83s
84t
85u
86v
87w
88x
89y
90z
480
491
502
513
524
535
546
557
568
579
112F1
113F2
114F3
115F4
116F5
117F6
118F7
119F8
120F9
121F10
122F11
123F12

rounding

Rounding radius of edges of border/background. This is optical rounding - so has nothing to do with mathematical rounding...

0Straight edges
5Rounding with radius 5
10Rounding with radius 10

rowalignmenty

If more than one component is arranged within one row, then components need to decide how they want to be aligned vertically inside the row - in case the height of the row exceeds the height of the component itself.

topTop
centerCenter (default)
bottomBottom

rowdistance

Distance that is left between tow rows. Only integer (pixel) values are allowed, no percentage values.

0No distance (default)
22 pixels
55 pixels

rowspan

Spanning of rows if used inside a GRIDLAYOUTPANE.

1Control spans one row (default)
22 rows
33 rows

shadow

Shadow of component. The definition is done by several inner values: hoffset, voffset, blur and color.

hoffset:5;voffset:5;blur:5;color:#C0C0C0full shadow definition
color:#C0C0C0Definition only via color, rest of values is set to default values

styleseq

Style class names that are applied to this component.

stylevariant

In CaptainCasa you can define styles definitions for components. A style definition is a definition of a set of default attribute values that are applied to the component. In case you want to differenciate between different usage types of the component you can apply multiple styles - and use the stylevariant attribute to select between.

tooltip

Text that is shown as hint when the user stays with the mouse on top of the control for a while.

...anytext...Text that is displayed as tooltip.
server:trueIndicator that tooltip for the component is managed on server side. The actionListener will be invokde with events BaseActionEventTooltipStarted and BaseActionEventTooltipEnde. On server side you may implement some modeless popup in order to show some more complex tooltip
server:true;opendelay:1000Duration in milliseconds after which a tooltip event is triggered when the user moves the mouse on top of this component

width

Width of the control. Either defined as absolute value or as percentage value. Pay attention when using percentage sizing: the size refers to what is given from the components above. When using percentage sizing then you may define a minimum size in addition, by appending it with a semicolon: "100%;100" means: use 100%, but always keep a minimum size of 100. If using absolute sizes you may append a "+" to define, that the size is extended if required by the component. - Please note: the sizing may be completely taken over by the parent component (e.g. if a component is used in a grid cell), in this case the size definintions on this component level are obsolete.

100100 Pixels
120120 Pixels
200200 Pixels
50%50 percents
100%Full available width

withfocusevent

If set then corresponding focus events are triggered if the component gains/looses the focus.

false(default) no focus events
truewith focus events
focusgainedwith focus events but only for gaining the focus
focuslostwith focus events but only for loosing the focus

x

x-pixel-position: this attribute is only used if the component is directly placed into a PAINTAREA!

y

y-pixel-position: this attribute is only used if the component is directly placed into a PAINTAREA!