The component TOUCHSIGNATURE renders a rectangle area in which the user can write signatures by touch or mouse gestures.
Typically used attributes
All attributes are
Used inside: ADAPTIVETILECONTAINER, ADAPTIVETOOLBAR, AREASELECTOR, BLOCKABLEAREA, COLSYNCHEDROW, DRAWAREA, FOLDABLEPANEHEADERROW, GRIDCOL, GRIDFOOTER, GRIDHEADER, GRIDHEADERLABEL, GRIDLAYOUTROW, LABELCONTAINER, LAYEREDPANE, OVERLAYAREABASEITEM, OVERLAYAREAITEM, PAGEBEANROOT, PAINTAREAITEM, REPEAT, ROW, ROWADAPTIVELINE, ROWFLEXCOLUMNCONTAINER, ROWFLEXLINECONTAINER, ROWFOOTER, ROWHEADER, ROWTITLEBAR, SCHEDULEITEM, SCHEDULEITEMAREA, SIZEANIMATIONAREA, SPANGRIDCOL, STABLEAREA, TABBEDAREABEGIN, TABBEDAREAEND, TEXTWITHCONTROLS, TREENODE
Special binding to component adapter object instance on server side. The component adapter must be an instance of IComponentAdapterBinding. For some components (e.g. FIXGRID) there is an extended interface (e.g. IFIXGRIDComponentAdapterBinding).
The attribute value must be an expression.
#{tobedefined} | Binding to IComponentAdapter instance |
If set to true then changes of the width/height of the component are animated.
true | With animation |
false | Without animation (default) |
Name of macro that is used for generating certain attributes of this component. Please pay attention: the value of this attribute is read one time for each control and cannot be changed afterwards.
The attribute value must not be changed once the component is created.
Background paint commands. There is a sequence of paint commands which can be executed one after the other by listing them as semicolon separated list. - By appending certain suffixes to a command you can define that the command is only executed in a certain situation. Available suffixes are: _empty (content of component is empty), _focus, _nofocus, _enabled, _disabled, _mouseover. Multiple suffixes can be used in parallel (e.g. write_empty_focus).
----- | ----- bgpaint commands for all clients ----- |
error() | Component indicates error. |
mandatory() | Component indicates mandatory input. Only is shown if component does not have any content yet. |
bgbackground(#FF0000) | Background with one color |
bgbackground(#FF0000,#0000FF,vertical) | Background as gradient of two colors |
bgimage(left,/images/xyz.png) | Image at certain position |
bgwrite(left,...text...) | Text at certain position |
bgwrite(left,...text...,#800000,12) | Text at certain position with defined color and size |
----- | ----- bgpaint commands for Java clients ----- |
rectangle(0,0,100%,100%,#FF0000) | Red rectangle |
rectangle(20,20,100,100,#FF0000) | Red rectangle from 20,20 to 120,120 |
rectangle(20,20,100%-40,100%-40,#FF0000) | Minus absolute values is allowed after percentage definitions |
rectangle(0,0,100%,100%,#FF0000,#00FF00,vertical) | Rectangle with color changing from red to green in vertical direction |
roundedrectangle(0,0,100%,100%,10,10,#FF0000,#00FF00,vertical) | Rectangle with color changing from red to green in vertical direction |
line(0,0,100%,100%,1,#00FF00) | Green line crossing the whole rectangle, from coordinate 0,0 to coordinat 100%,100%, thickness of line is 1 |
image(0,0,/images/xyz.png,lefttop) | Image output x,y,image,position (lefttop/centermiddle/rightbottom...) |
image(0,0,200,100,/images/xyz.png,lefttop) | Image output x,y,width,heigh,image,position (lefttop/centermiddle/rightbottom...) |
scaledimage(0,0,200,100,/images/xyz.png,lefttop) | Scaled image output, the width/height ration is kept while scaling : x,y,width,heigh,image,position (lefttop/centermiddle/rightbottom...) |
heximage(0,0,08FF40324672849CDFE...,lefttop) | Image output x,y,hexadecimal image,position (lefttop/centermiddle/rightbottom...) |
heximage(0,0,200,100,08FF40324672849CDFE...,lefttop) | Image output x,y,width,height,hexadecimal image,position (lefttop/centermiddle/rightbottom...) |
scaledheximage(0,0,200,100,08FF40324672849CDFE...,lefttop) | Scaled image output x,y,width,height,hexadecimal image,position (lefttop/centermiddle/rightbottom...) |
border(0,0,100%,100%,#C0C0C0,2) | Rectangular border with thickness 2 |
roundedborder(0,0,100%,100%,10,10,#C0C0C0,2) | Rounded border with thickness 2 |
write(0,0,Some text,lefttop) | Some text in the left top corner |
write(50%,50%,Some text,20,#00FF00,centermiddle) | Some text in the left center, font size 20, font color green |
write(50%,50%,Some text,20,#00FF00,bold,centermiddle) | Some text in the left center, font size 20, font color green,bold |
write(50%,50%,Some text,20,#00FF00,italic,centermiddle) | Some text in the left center, font size 20, font color green,italic |
write(50%,50%,Some text,20,#00FF00,normal,centermiddle) | Some text in the left center, font size 20, font color green,normal |
write(0,100%,Some text,20,#00FF00,default,lefttop,90) | Some text in the left bottom corner, font size 20, font color green, 90 degrees rotated |
write(20,100%,Some text,20,#00FF00,default,lefttop,90,-1,1) | Some text in the left bottom corner, font size 20, font color green, 90 degrees rotated. x scaling -1, y scaling 1 |
write(20,100%,Some text,20,#00FF00,bold,lefttop,90,-1,1) | Some text in the left bottom corner, font size 20, font color green, 90 degrees rotated. x scaling -1, y scaling 1 |
writeifempty(0,0,Some text,lefttop) | Same as write-command, but now only visible if component contains data |
writeifempty(50%,50%,Some text,20,#00FF00,centermiddle) | Same as write-command, but now only visible if component contains data |
writemultiline(0,0,100%,100%,Some text) | Some text into the defined rectangle. Only fully supported with FX client, in Swing client the text will be output as one line. |
writemultiline(0,0,100%,100%,Some text,20,#FF0000,bold) | Some text into the defined rectangle. In additional font size, text color and text style (normal,bold,italic) are passed. Only fully supported with FX client, in Swing client the text will be output as one line. |
oval(0,0,100%,100%,#FF0000) | Red ellipse |
oval(0,0,100%,100%,#FF0000,#00FF00,vertical) | Red ellipse with color changing from red to green |
ovalborder(0,0,100%,100%,#FF0000,2) | Red ellipse border, red, 2 pixels thick |
grid(100,#00000020) | Grid with line distance 100, black line color - with transparency |
nodisabled() | Switches off the automated shading of disabled input components |
background(#FF0000) | Sets the background of the painted area. |
backgroundnofocus(#FF0000) | Sets the background of the painted area - which is only drawn if the component does not hold the focus. |
repeatimage(/images/xyz.png) | The image is repeated and drawn all over the available space. |
Defintion of border of control. Either defined as straight color value, with then having a border of 1 pixel. Or: an explicit per-side definition as comma separated list of border definition values.
#808080 | 1 pixel border in color dark gray. |
top:1;color:#808080 | top:1;color:#808080 : border only on top, 1 pixel height, color #808080 |
top:1;bottom:1;left:1;right:1;color:#FF0000 | top:1;bottom:1;left:1;right:1;color:#FF0000 : red border of 1 pixel size |
top:1;bottom:1;left:1;right:1;color:#FF0000;dashing:5,2 | top:1;bottom:1;left:1;right:1;color:#FF0000 : red border of 1 pixel size, dashed with segments of 5 pixesl and 2 pixels; dashing only supported with FX Client! |
noborder | Defines that no border is painted - esp. in cases when empty borders are normally added (e.g. in grid cells) |
Duration in milliseconds after which a signature is cleared when the user interrupts signing.
2000 | 2000 ms (default) |
3000 | 3000 ms |
4000 | 4000 ms |
5000 | 5000 ms |
In case the space provided by the container (e.g. gridlayoutcontainer) for the component is wider than the component itself: definition where to place the component
left | Left (default) |
center | Center |
right | Right |
Spanning of columns if used inside a COLSYNCHEDROW or inside a GRIDLAYOUTPANE.
1 | Control spans one column (default) |
2 | 2 columns |
3 | 3 columns |
Comment that can be asigned to any component. The comment is not operationally used.
Any text | Any text |
Configuration information that is attached to this component. This information is not functionally used by CaptainCasa, but may be used for any application specific purpose.
Indicator if component is enabled or not.
true | Component is enabled. |
false | Component is not enabled. |
Indicator if data changed in the component are transferred immediately to the server, causing a normal round trip processing from client to server.
true | Flush is done on data change. |
false | No flush. Data is transferred to server with next round trip. |
Used in addition to FLUSH attribute. Defines the number of milliseconds after which the component automatically flushs to the server. You need to set FLUSH=true in addition. Do not define too short - user input is not possible during server-roundtrips by default.
No flush timer (default) | |
1000 | 1000 milliseconds |
2000 | 2000 milliseconds |
5000 | 5000 milliseconds |
Height of the control. Either defined as absolute value or as percentage value. Pay attention when using percentage sizing: the size refers to what is given from the components above. When using percentage sizing then you may use an extended syntax: "xxx%;<min>;<max>": in this case the minimum and maximum definitions are respected. If using absolute sizes you may append a "+" to define, that the size is extended if required by the component. - Please note: the sizing may be completely taken over by the parent component (e.g. if a component is used in a grid cell), in this case the size definintions on this component level are obsolete.
100 | 100 pixels |
120 | 120 pixels |
200 | 200 pixels |
50% | 50 percents |
100% | Full available height |
100%;100 | Full available height, minimum 100 pixels |
100%;100;500 | Full available height, minimum 100 pixels, maximum 500 pixels |
100%;;500 | Full available height, maximum 500 pixels |
Resolution in which pixels are recorded.
The attribute value must not be changed once the component is created.
10 | ...by 5 pixels, quite rough |
5 | ...by 5 pixels (default) |
1 | ...every pixel, finest |
Semicolon separated string, containing coordinates of signature
The attribute value must be an expression.
Reference to an outside object that is the content behind the component. E.g. a field is representing a certain field of a database table: in this case you could define the value table;column. The reference plays a siginficant role within the attributemacro management.
The attribute value must not be changed once the component is created.
ref | One reference |
ref1;ref2 | Two references |
ref1;ref2;ref3 | Three references |
Flag that indicated if this component is rendered at all. If set to false then the component is not rendered - there is no component data sent to the client.
The attribute value must be an expression.
true | Component is rendered (default) |
false | Component is not rendered |
Rounding radius of edges of border/background. This is optical rounding - so has nothing to do with mathematical rounding... The definition is either made for all corners - or as semicolon separated variant for each corner.
0 | Straight edges |
5 | Rounding with radius 5 |
10 | Rounding with radius 10 |
0;5;5;0 | indiviual per corner: left top, right top, right bottom, left bottom |
0;50%;5;2 | indiviual per corner: any mixing is allowed.. |
If more than one component is arranged within one row, then components need to decide how they want to be aligned vertically inside the row - in case the height of the row exceeds the height of the component itself.
top | Top |
center | Center (default) |
bottom | Bottom |
Spanning of rows if used inside a GRIDLAYOUTPANE.
1 | Control spans one row (default) |
2 | 2 rows |
3 | 3 rows |
Shadow of component. The definition is done by several inner values: hoffset, voffset, blur and color.
hoffset:5;voffset:5;blur:5;color:#C0C0C0 | full shadow definition |
color:#C0C0C0 | Definition only via color, rest of values is set to default values |
Style class names that are applied to this component.
In CaptainCasa you can define styles definitions for components. A style definition is a definition of a set of default attribute values that are applied to the component. In case you want to differenciate between different usage types of the component you can apply multiple styles - and use the stylevariant attribute to select between.
2 dimensional transformation that is applied to the component.
no transformation (default) | |
rotate(10deg) | Rotation by 10 degrees |
rotate(-10deg) | Rotation by -10 degrees |
skewX(-10deg) | Skew in horizontal direction by -10 degrees |
skewY(10deg) | Skew in vertical direction by 10 degrees |
skew(10deg,20deg) | Skew in both horizontal (10 degrees) and vertical (20 degrees) direction |
Width of the control. Either defined as absolute value or as percentage value. Pay attention when using percentage sizing: the size refers to what is given from the components above. When using percentage sizing then you may use an extended syntax: "xxx%;<min>;<max>": in this case the minimum and maximum definitions are respected. - Please note: the sizing may be completely taken over by the parent component (e.g. if a component is used in a grid cell), in this case the size definintions on this component level are obsolete.
100 | 100 Pixels |
120 | 120 Pixels |
200 | 200 Pixels |
50% | 50 percents |
100% | Full available width |
100%;100 | Full available width, minimum 100 pixels |
100%;100;500 | Full available width, minimum 100 pixels, maximum 500 pixels |
100%;;500 | Full available width, maximum 500 pixels |
x-pixel-position: this attribute is only used if the component is directly placed into a PAINTAREA!
y-pixel-position: this attribute is only used if the component is directly placed into a PAINTAREA!